8mm Toughened Tempered Glass
Aug. 06, 2024
8mm Toughened Tempered Glass
8mm Toughened Glass by Elite Safety Glass
For more information, please visit Northglass.
It is processed by heating 8mm clear float glass, 8mm low iron glass, 8mm reflective glass, 8mm patterned glass, or 8mm Low-e glass to 650 degrees softening point, and then quenched rapidly. It creates tension inside the glass and compression outside the glass surface.
Heating Time
8mm clear/low iron tempered glass in Radiant furnace: 39s/mm, total 310 seconds~320 seconds
8mm clear/low iron toughened glass in Forced Convection furnace: 28s/mm, 220 seconds~230 seconds
8mm tinted/colored tempered glass in Radiant furnace: 36s/mm, 282 seconds~290 seconds
8mm tinted/colored toughened glass in Forced Convection furnace: 28s/mm, 220 seconds~230 seconds
Quenching Time
8mm toughened glass Quench Time = Glass Thickness^1.8=8mm^1.8=42s
Compression & Tension Zone
21% (1.68mm) up & down part with compression, 58% (4.64mm) middle part with tension.
Surface compression >90Mpa (over Psi).
8mm Toughened Glass Standard & Certificate
North American
ASTM C standard, SGCC certificate
Europe
EN standard, CE certificate
Australia & New Zealand
AS/NZS- standard, AS/NZS certificate
Features & Benefits
Quality Standard
<0.2% local bow & <0.3% arc bow standard, with non-visual defects in the surface.
Processing Flexibility
3~5 stable cooperative factories to guarantee lead time based on different requests.
Turnkey Solution
From smaller size glass louver to giant glass mm*mm toughened glass.
Safety
when 8mm tempered glass is broken, it will break into granularities to prevent series of injuries.
For more information, please visit toughened glass 8mm.
Strength
8mm tempered glass is about 4~5 times stronger than 8mm annealed glass.
Stability
tempered glass can withstand 280&#; temperature variation.
Typical Applications
Shower Screen
Glass door for pool fencing
Glass table top
Glass furniture
Windows, doors, facades
Toughened Glass 8mm ANY SIZE
MINIMUM CHARGE FOR BESPOKE GLASS - £200, YOU WILL BE REQUIRED TO PAY THE REMAINDER BEFORE YOUR ORDER IS PROCESSED AND SHIPPED.
E.G. IF YOU ORDER 4 PIECES OF GLASS AT £50 EACH, YOU WILL MEET THE MINIMUM REQUIREMENT
- All Edges Polished as Standard
- Dubbed Corners (unless asked otherwise)
- 4x Holes Drilled per pane FREE (upto 25mm)
- Maximum Size x mm
- Toughened Safety Glass
- 15 Working Day Lead Average Time
- Made To The Millimetre to BSEN Standards
- Toughening ratio is 10/1 - meaning your glass pieces should not exceed more than 10 times the width or there may be an issue in manufacturing them, we have the right to refuse to have pieces out of ratio manufactured and will deal with this on a case by case basis.
By placing an order you agree to the following
Delivery lead time is currently 15 working days from placing order, this isn't a guaranteed time but a general lead time going off an average, it can be longer in extremely busy times or areas we don't cover daily.
Sometimes due to delays the delivery is made on the following day, however this is rare so please ensure your assigned day and the following are OK for delivery to take place.
Please note that the delivery can be anytime between 07.30 and 17.30 and will need to be signed for
**PLEASE ENSURE ENOUGH HELP IS AVAILABLE FOR OFF LOADING **
Deliveries are not guaranteed. Although over 97% of deliveries run smoothly some do incur some problem and/or delays. We request not to book installation before goods arrive. We will not compensate against failed, delayed or other delivery issues.
Deliveries are Curb side only. You must have enough people on site for offloading, delivery is curbside only. Any damages caused during offloading are the customers responsibility. If any issues are noticed at the point of delivery such as incorrect size glass, specification or damaged glass then the glass should be rejected and sent back with the delivery driver, if you accept delivery it is your responsibility to return it to the manufacturer at your own cost, CWD will not reimburse for returns of glass. We are an agent, not a manufacturer so your warranties etc are with the manufacturer.
Failed deliveries will result in a redelivery charge.
CWD Will not be responsible for any failing of glass due to incorrect size/thickness being ordered, we assume you have done your research and know what you need to order.
As each pane is made to order, you accept by placing the order that you have 48 hours to cancel or amend, we can attempt to make changes/cancel afterwards but there may be fee's for doing so which will be advised as requested
Please ensure you have read and understood the above before placing an order.
POSTCODES WHERE DELIVERY IS NOT INCLUDED - ANY ORDERS PLACED WE WILL CONTACT FOR FURTHER PAYMENT OF DELIVERY CHARGES TO THESE AREAS.
AB, BT, CT, DD, DG, EH, FK, G, IV, KA, KW, KY, ML, PA, PH, PL, TD, TN23 - 30, TR
Contact us to discuss your requirements of tempered float glass. Our experienced sales team can help you identify the options that best suit your needs.
73
0
0
Previous: None
Comments
All Comments (0)