Frequently Asked Questions

Physical dimensions, rather than system output, is the best way to measure your needs. The geometric shape of the system layout, and if the array is split into multiple sets of panels, are the true determinants. This, of course, varies greatly from installation to installation. Therefore, we recommended that you calculate a precise number before ordering.
To get this figure, simply calculate the perimeter area around your system.
As a rule of thumb, most solar panels are approximately 900mm wide X mm long. If you have an array that is 10 panels across and 2 panels high (with no gap between the rows) you would need approximately x 2 for one side and 900 x 10 for the top side. So to cover all 4 sides you would need x 2 x 2 = 6.4M(to cover both sides) and 900 x 10 x 2 = 18M. There you will need a minimum of 24.4M. Be sure to add extra material to cut 45 degree angles on the corners so required is a further 600mm for each outside corner. 4 x 600mm
Total required for this 20 panel system would be&#;.
Sides=6.4M
Top and bottom=18M
Outside corners=2.4
Total=26.8M (one kit)
We realize that all arrays may not be this simple and there may be multiple arrays on a roof. If you can map out the arrays, you can easily calculate your requirements for the screen. Our mesh may be purchased as part of a kit with a 30 roll with 100 clips or you may purchase it separately. We also sell 10M expansion kits if one kit will be just a bit too short!

Click here to get more.

gaite contains other products and information you need, so please check it out.

Use tab to navigate through the menu items.

The company is the world’s best solar panel bird proofing mesh supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.