Product introduction, advantages and disadvantages ...

Butyl waterproof tape is a kind of lifetime non-curing self-adhesive waterproof sealing tape made of butyl rubber as the main raw material, with other additives, and processed through advanced technology. It has strong adhesion to the surface of various materials. At the same time, it has excellent weather resistance, aging resistance and water resistance, and it has the functions of sealing, damping and protecting the surface of the adherend. The product is completely solvent-free, so it does not shrink or emit toxic gases. Because it does not cure for life, it has excellent follow-up to the thermal expansion and contraction of the surface of the adherend and mechanical deformation. It is an extremely advanced waterproof sealing material.

Check now

This kind of gas is difficult to penetrate the material, it can be said to be a piece of cake when used as a waterproof seal. What's more terrifying is its outstanding weather resistance. With relevant test data, butyl rubber can withstand high temperatures up to 120°C and low temperature- 40°C.

Features

(1) Excellent mechanical properties: high bond strength, high tensile strength, good elasticity and extension properties, and strong adaptability to interface deformation and cracking.

(2) Stable chemical properties: excellent chemical resistance, weather resistance and corrosion resistance.

(3) Reliable application performance: its adhesion, water resistance, airtightness, low temperature resistance and followability are good, and its dimensional stability is good.

(4) The construction operation technology is simple.

(1) Waterproof treatment of roof waterproofing, underground waterproofing, structural construction joints and lap joint sealing of polymer waterproofing membranes for newly built projects.

(2) Seal and waterproof treatment of construction joints of subway tunnel structure in municipal engineering.

(3) Airtight, waterproof and shock absorption at the joints of the color profiled plates. The airtightness, waterproof and shock absorption of the joints in the sunshine board project.

4 Bonding and sealing treatment in automobile assembly

5 Waterproof and sealing treatment of joints in steel structure construction

6 Compound aluminum foil butyl tape is suitable for waterproof sealing of various civil roofs, color steel, steel structures, waterproof coils, PC boards, etc. under sunlight

Construction regulations

General

(1) This regulation is applicable to the sealing and waterproofing projects of civil structural roofs and metal plate surfaces that use tape as supporting materials for waterproofing membrane bonding, metal profiled board bonding, and PC board bonding.

(2) When designing or using tape, it should be carried out in accordance with relevant regulations or with reference to company corporate standards.

General provisions

(1) Construction should be carried out in the temperature range of -15°C&#;45°C (appropriate measures shall be taken when the temperature exceeds the specified temperature range)

(2) The surface of the base layer must be cleaned or wiped clean, kept dry, free from floating soil and oil.

(3) The bonding part cannot be torn or peeled within 24 hours after construction.

(4) According to actual project needs, choose different types and sizes of tape.

(5) Place the boxes at a distance of about 10cm from the ground. Do not stack them more than 5 boxes.

Construction tools

Cleaning tools, scissors, pressure roller, wallpaper knife, etc.

Requirements

(1) The bonding surface is clean and free of oil, dirt, water, and moisture.

(2) In order to ensure the bonding strength, the base surface temperature is above 5°C, special low temperature environment can be specially produced.

(3) When using, uncover the tape paper for one circle before use.

(4) Do not use it at the same time with waterproof materials containing organic substances such as benzene, toluene, methanol, ethylene, and silica gel.

Process characteristics

(1) The construction is convenient and quick. The construction with waterproof tape should be bonded in place at one time, and the surface of the base layer should be clean.

(2) Wide construction environment requirements. The ambient temperature is -15°C&#;45°C, and the humidity is below 80°C, which can be constructed normally, and has strong environmental adaptability.

(3) The repair process is simple and reliable. Only need to use single-sided tape for large leaks.

Construction method

Construction method of new steel structure roof

(1) According to the metal plate type or the gap of the joint, the width of the joint, and the engineering design requirements, select the specifications and sizes.

(2) Wipe clean the joints of the metal plates.

(3) Start with one end of the metal plate, slowly open the double-sided tape and stick the sealing tape in a straight line along the seam.

At the overlap of the lower metal plate, gently press the tape with your hand to make it adhere firmly to the metal.

(4) Tear off the release paper on the tape, press the upper metal plate of the interface into the joint, after bonding

Squeeze the joints sequentially to make the joints adhere firmly and tightly closed.

(5) Fix the screws and tighten them to make the upper and lower adhesive surfaces of the tape adhere tightly.

Construction method of gutter on metal plate roof

(1) After installing the prefabricated gutter, clean the cement surface of the parapet above the gutter and apply the primary treatment agent.

(2) After the primary treatment agent is suspected to be solid, install the flooding plate to ensure that the installation is firm and tightly integrated with the wall.

(3) Wipe the flooding board clean, paste the single-sided aluminum foil tape at the joint between the flooding board and the cement wall, and press them in order to make the bonding firm;

Construction method of steel structure roof leakage repair project

Leaking metal plate contact

Hebei Top Tape are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

(1) Remove the original sealant at the overlap of the metal plates.

(2) Wipe clean the metal plate of the repaired part.

(3) Choose single-sided aluminum foil tapes of different specifications according to the joint situation of the leak;

(4) Use single-sided aluminum foil tape to directly cover the joints;

(5) After bonding, roll the repaired parts in order to make the single-sided aluminum foil tape adhere firmly to the joints.

Water leakage in the combination of profiled steel plate and cement wall

(1) Remove all the original silicone glue at the joint between the profiled steel plate and the cement wall;

(2) Wipe clean the joint between the profiled steel plate and the cement wall; the cement wall shall not be sanded, and the base treatment agent shall be applied if possible.

(3) Paste the single-sided aluminum foil tape on the joint between the metal plate and the cement wall, and then roll the repaired part in order to make the single-sided aluminum foil tape adhere firmly at the joint.

(4) Construction method of daylighting board roof.

How to use double-sided tape

(1) After the lighting board is installed on the frame. Wipe clean the area where the aluminum alloy pressure plate will be bonded with tape.

(2) Open the tape and bond it to the grooves on both sides of the aluminum alloy pressing plate. After installation, compact the tape and tear off the separating paper. After installing the aluminum alloy pressing plate on the lighting plate,

And fix it with waterproof screws;

(3) Use single-sided aluminum foil tape to directly bond and seal the wall joints on the lighting board.

How to use single-sided non-woven tape

(1) After the lighting board is installed on the frame, wipe clean the joints of the lighting board where the tape will be bonded.

(2) Open the adhesive tape to the seam of the light board, and tear off the separating paper while compacting the tape, and then install the aluminum alloy pressing plate on the light board. Secure with waterproof screws.

(3) Use single-sided aluminum foil tape to directly bond and seal the joint between the lighting board and the wall.

And waterproofing membrane construction method

1. Construction requirements

(1) Read the performance index of the tape carefully before construction to make it suitable for the ambient temperature and humidity during construction.

(2) According to different waterproofing membranes, different construction methods, different types of tapes with different specifications and sizes are selected.

(3) Before construction, the quality of the preceding project shall be checked and accepted, and the waterproof layer shall be constructed after being qualified.

(4) The waterproof coiled material is constructed according to the requirements of the engineering design. The waterproof coiled material and the leveling layer are firmly bonded, and hollowing is not allowed. The waterproof layer after construction should be protected.

(5) When using waterproof tape on the parapet wall, attention should be paid to the firmness and smoothness of the bonding part of the brick wall or concrete surface. If the surface is poor, cement gauze slurry should be used for repairing, so that the surface is smooth and firm without floating sand.

2. Construction method

(1) Position the roll material and leave the overlap width of the roll material seam and paste it. Waterproof coiled material is fully spread; when the overlapped part of the coiled material is used with adhesive and tape, the overlapped width of the coiled material is 80MM-100MM, and the width of the tape is 15MM-25MM.

(2) When the overlapping part of the coil is only bonded with tape, the overlapping width of the coil is 50mm.

(3) The waterproof coiled material is empty; the overlapped part of the coiled material is bonded by tape, and the overlapped width of the coiled material is 60MM.

(4) For projects with higher waterproof level, 25MM single-sided non-woven tape can be used for edge sealing at the interface.

(5) Double-sided tape is used for the bonding between coil and coil, and between the coil and the base layer; single-sided tape is used for the sealing and bonding of the reverse interface and port.

WeChat:

Website: www.dongnan88.cn

: