Production and Technical Information for Safety Footwear ...

There are two slip resistance tests specified in EN ISO : (with the method described in EN); the first is soapy water (Sodium Lauryl Suphate solution) on a ceramic tile. If the footwear passes this test then the boot can be marked SRA. The second is oil (Glycerol) on a steel plate, if the boot passes this test then it can be marked SRB. If a boot passes both the SRA and SRB test then it can be marked SRC.

For more information, please visit LONGLAST.

There is a common misunderstanding that SRC is the best for slip resistance - this is not the case!  Since the introduction of slip testing, accidents caused by slips have not reduced; this is because to pass the slip requirements on oily steel manufacturers have to sacrifice some slip performance in water, but most slip accidents occur where water is the contaminant (over 95%).

If you are looking for more details, kindly visit industrial rubber boots manufacturer.

The Workmaster&#; vulcanised rubber sole produces very high levels of slip resistance with soapy water on a ceramic tile, and these test results have been confirmed during customer wear tests. Due to the performance characteristics of the sole material, boots with our vulcanised rubber sole also achieve a pass on the SRB (oil on steel test), without compromising SRA performance and are marked SRC

For more Outdoor waterproof EVA bootsinformation, please contact us. We will provide professional answers.