Login

Your Name:(required)

Your Password:(required)

Join Us

Your Name:(required)

Your Email:(required)

Your Message :

0/2000

Your Position: Home - Air Conditioning System - School Bus Fleet: Air Conditioning Considerations

School Bus Fleet: Air Conditioning Considerations

Author: Molly

Sep. 02, 2024

School Bus Fleet: Air Conditioning Considerations

school bus fleet, school bus air conditioning

If you are looking for more details, kindly visit our website.

Do all the vehicles in your school bus fleet include air conditioning? In many districts, this is already the case - yet there are still plenty of districts playing catch-up. A/C comes standard on most new buses, but that doesn't help smaller or lower-income districts who can't afford to replace their fleet. For those districts, retrofitting is an option. 

Retrofitting can allow them to add A/C to existing buses - if they can navigate the maze of choices available. Here are a few of the most important factors to look at.

Four Critical Factors to Consider When Adding A/C to Your School Bus Fleet

1. Type of A/C Unit

There is a huge range of possible ways to add air conditioning to a school bus. These include upgrading the front-panel A/C system, adding an evaporator in the front or back, or installing a roof-mounted unit.

Rooftop systems are generally the most popular, as they require the least work to install and have relatively straightforward wiring/piping requirements. Still, interested districts should do their homework on the wide variety of technologies on offer.

2. Electrical Demands

This is one of the big factors which will influence whether a bus is even capable of being upgraded - can its electrical system support the A/C system? On stock buses, this is rarely an issue, but it can start being a problem for districts which have already added other upgrades to the bus over the years.

Be sure you know the battery's actual output - not just what's in the manual - and whether other add-ons are drawing from it.

3. Cool-Down Time

Link to SONGZ

Of course, the cooling capacity of an A/C unit can vary quite a bit between models. What sort of performance should you look for? In general, consider the baseline to be the ability to cool a bus from 100°F to 80°F in half an hour. However, that's really the operational minimum. Being able to go from 100°F to 70°F in the same timespan will make the ride a lot more pleasant for passengers.

4. Know That Not All BTU Ratings Are the Same

Virtually all air conditioners will claim a certain capacity of BTUs (British Thermal Units) to rate their cooling power. However, there is no enforced standard for doing this. Different manufacturers can use wildly different methods for measuring their BTU capacity, which often makes valid A-B comparisons impossible.

Never choose an A/C unit based on claimed BTU capacity alone.

The best procedure for buying A/C upgrades for your school bus fleet is to take it slow. Talk to plenty of retailers and do research online before making any final decisions.

Have you recently upgraded buses with A/C? Which products were best for you?

Bus Air Conditioner For Sale


Installation steps of 

1. Prepare the necessary tools and materials: This may include a power drill, screws, brackets, duct tape, insulation material, and the air conditioning unit itself.

2. Determine the best location for the air conditioner: The air conditioner should be installed in a location that allows for proper airflow and ventilation.

3. Install the brackets: The brackets will be used to mount the air conditioner to the roof of the bus. They should be securely attached to the roof using screws.

4. Install the wiring: The air conditioner will need to be connected to the bus's electrical system. This may involve running wiring through the bus's interior and connecting it to a power source.

5. Install the ductwork: Ductwork will need to be installed to allow air to flow from the air conditioner into the bus's interior. This may involve cutting holes in the roof and walls of the bus.

6. Install insulation: Insulation material should be installed around the ductwork to prevent air from escaping and to ensure that the air conditioner is operating efficiently.

7. Test the system: Once the installation is complete, the air conditioner should be tested to ensure that it is working properly. This may involve running the system for a period of time and checking the temperature inside the bus to ensure that it is comfortable.

It is important to note that the installation of a electric city bus air conditioner should be carried out by a qualified professional who has experience working with this type of equipment.
 

Installation steps of

pure electric city bus air conditioner

(the installation

shuttle bus air conditioner

is the same) The installation steps of a pure electric city bus air conditioner may vary depending on the specific make and model of the air conditioner. However, here are some general steps that may be involved in the installation process:This may include a power drill, screws, brackets, duct tape, insulation material, and the air conditioning unit itself.The air conditioner should be installed in a location that allows for proper airflow and ventilation.The brackets will be used to mount the air conditioner to the roof of the bus. They should be securely attached to the roof using screws.The air conditioner will need to be connected to the bus's electrical system. This may involve running wiring through the bus's interior and connecting it to a power source.Ductwork will need to be installed to allow air to flow from the air conditioner into the bus's interior. This may involve cutting holes in the roof and walls of the bus.Insulation material should be installed around the ductwork to prevent air from escaping and to ensure that the air conditioner is operating efficiently.Once the installation is complete, the air conditioner should be tested to ensure that it is working properly. This may involve running the system for a period of time and checking the temperature inside the bus to ensure that it is comfortable.It is important to note that the installation of a electric city bus air conditioner should be carried out by a qualified professional who has experience working with this type of equipment.

Are you interested in learning more about bus air conditioner suppliers? Contact us today to secure an expert consultation!

19

0

Comments

0/2000

All Comments (0)

Guest Posts

If you are interested in sending in a Guest Blogger Submission,welcome to write for us!

Your Name (required)

Your Email (required)

Subject

Your Message (required)

0/2000